Table of Contents
Advertisement
3-2 FRAME ASSEMBLY - 15' FOLD MODEL
IMPORTANT
READ ALL SAFETY PRECAUTIONS AT THE
FRONT OF THE SECTION BEFORE ATTEMPT-
ING ANY OF THE FOLLOWING PROCEDURES.
3-2.1
Connect main frame and folding wing
together using hinge pin, 1" flat washers, and
1/4 x 2 cotter pins (See Figure 3-2).
3-2.2
Place frame assembly on stands ap-
proximately 36" high.
Figure 3-2 Frame Assembly - 15' Fold Model
WARNING
DO NOT ATTEMPT TO LIFT HEAVY
PARTS (SUCH AS THE FRAME, DISC
GANGS, ROCK SHAFT, AND PULL
HITCH) MANUALLY. USE A HOIST OR
A FORK LIFT TO MOVE THESE PARTS
INTO POSITION.
3-3
Advertisement
Table of Contents
