Danfoss VLT AQUA Drive FC 202 Operating Instructions Manual page 17

Electrical Installation
provided on the equipment (see chapter 4.6 Motor
Connection).
•
Use high-strand wire to reduce electrical
interference.
•
Do not use pigtails.
NOTICE!
POTENTIAL EQUALISATION
Risk of electrical interference, when the ground potential
between the frequency converter and the control system
is different. Install equalising cables between the system
components. Recommended cable cross-section: 16 mm
MG20MC22
Operating Instructions
2
.
Danfoss A/S © 01/2015 All rights reserved.
4 4
15