Cleaning Magnet Arrays; Transfer Log Files - Rockwell Automation MagneMotion MagneMover LITE Service Manual

4. Make sure that all motor mounting hardware is secure.
5. Make sure that all guideway mounting hardware is secure.
6. Make sure that any vehicle grounding materials (for example, static brushes) are
secure and functioning properly.
7. Make sure that all vehicle hardware, especially the hardware that holds the magnet
array, is secure.
8. Make sure that the Vehicle Gap (distance between the magnet array on the vehicle and
the motor) is within tolerance for all vehicles on all motors.
9. Return the MM LITE transport system to normal operation.

Cleaning Magnet Arrays

The magnet arrays attract ferrous particles from the air and surrounding surfaces. These parti-
cles accumulate and appear as small "hairs" on the surface of the array.
• Use adhesive tape to capture the ferrous particles on the magnet arrays.
• To combat accumulated debris, keep magnet arrays not being used in their original
container.

Transfer Log Files

Review the log files for each node controller and the HLC periodically to look for unexpected
messages.
Log files can be transferred from the node controller or SysLog server to a network server so
they can be archived or e-mailed to ICT Customer Support, see the Node Controller Interface
User Manual.
MagneMover LITE Service Manual
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
Maintenance
Preventive Maintenance
43