Regulatory Compliance; Eu Rohs And Eu Weee Compliance - Rockwell Automation MagneMotion MagneMover LITE Service Manual

Safety

Regulatory Compliance

Regulatory Compliance
Other sections of this manual may include additional regulatory information. These compo-
nents comply with the regulations from the organizations that are indicated in
CE (Conformité Européenne) – The European
safety requirements
UL
It is the responsibility of the end user/third party integrator to make sure that
the installed MagneMover LITE transport system complies with the appro-
priate facility, local, and national regulations.

EU RoHS and EU WEEE Compliance

®
MagneMotion
large-scale stationary industrial tool for purposes of the European Union RoHS and WEEE
Directives and are therefore exempt from mandatory compliance. The CE Marking on the
DoC excludes reference to the RoHS Directive for that reason.
However, MagneMotion has taken voluntary steps to make sure that its products comply with
the requirements of EU RoHS and WEEE.
10
The MagneMover LITE components are CE compliant. To determine if a
specific component is CE compliant, check for the CE marking on the com-
ponent. If necessary, request the official Declaration of Conformity (DoC)
from MagneMotion.
The MagneMover LITE components are UL Recognized in Canada and the
United States. To determine if a specific component is UL Recognized,
check for the UL Recognized Mark on the component. Some examples of
the Mark may not display the 'C' and 'US'.
Table 1: Regulatory Information
Organization
products are considered parts of a large-scale fixed installation and as a
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
Regulations
• Machinery Directive
• Low Voltage Directive
• EMC Directive
• 61010-1
NOTICE
Table 1.
MagneMotion