Technical Specifications; Technical Support - Baileigh Industrial TN-250 Operator's Manual

Tube and pipe notcher
Table of Contents

Advertisement

TECHNICAL SPECIFICATIONS

TN-250
Notching Capacity (OD)
Angle Adjustment
Power Requirements
Shipping Dimensions
Shipping Weight
FEATURES
• Solid steel construction
• Grade 8 bolts throughout, ensuring maximum rigidity
• Unique 6 jaw radial vise
• Will notch over 75°
• 1-1/4" hardened Thomson shaft with replaceable tips
• Slotted carriage for offset notches (no shims)
• Patent pending

TECHNICAL SUPPORT

Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileighindustrial.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
Imperial
0.5" – 2.5"
Infinite
1/2" (12.7mm) Powered Hand Drill
24" x 12" x 12"
50 lbs.
8
8
Metric
12.7mm – 63.5mm
610mm x 305mm x 305mm
23 kgs.

Advertisement

Table of Contents
loading

Table of Contents