Brother GTX pro Instruction Manual page 4

SAFETY INSTRUCTIONS
WARNING
Basic precautions
To prevent accidents and problems, do not modify the machine yourself. Brother will not be held responsible
for any accidents or problems resulting from modifications made to the machine.
Do not handle the power cord with wet hands. Otherwise, it may cause electric shocks.
Installation
Do not set up the printer in a dusty environment. If dust collects inside the printer, it may cause fire or electric
shocks or problems with correct operation.
Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a
serious electric shock, and problems with correct operation may also occur.
Do not bend the cords excessively or fasten them too hard with staples or anything similar to secure cords.
Otherwise it may cause fire or electric shocks.
Printing
If a foreign object gets inside the printer, immediately turn off the power, disconnect the power cord, and
contact the place of purchase or a qualified technician. If you continue to use the printer while there is a
foreign object inside, it may result in fire or electric shocks or problems with correct operation.
Do not allow the printer to come into contact with liquids. Otherwise it may cause fire or electric shocks or
problems with correct operation.
If any liquid gets inside the printer, immediately turn off the power, disconnect the power cord, and contact
the place of purchase or a qualified technician.
Do not use the printer when smoke or a bad odor is coming from the printer. Otherwise it may cause fire or
electric shocks or problems with correct operation. Immediately turn off the power, disconnect the power
cord, and contact the place of purchase or a qualified technician.
Keep your finger or any body part away from the rotating fan. Otherwise it will be caught up, which results in
injuries.
Turn off the power when you approach the fan.
4