Brother GTX pro Instruction Manual page 318

Error code Error message
[Ink Pouch Error
2095
White 34]
[USB flash drive Not
2100
Ready]
2101 [Not Enough Area]
2105 [No Files]
[Receiving History
2110
W/O Error1]
[Print Data Auto
2120
Delete Enable]
[White Ink Pause
2130 Mode...
Non-performable]
[Maintenance Pouch
2200
Set Black]
Description
An error has been
In that case, replace with a new
detected in the white
ink pouch set.
34 ink pouch.
Insert a USB flash memory into
the slot, wait for a couple of
seconds, and perform the
No USB flash memory operation.
been inserted into its Insert a USB flash memory into
insertion slot. the slot again.
If the problem still persists, check
on the format and type of the USB
flash memory.
At the writing stage to Use your PC to check free space
the USB flash on the USB flash memory.
memory there is not Insert the USB flash memory that
enough free space to has enough free space into the
store the data. insertion slot.
Connect the USB flash memory to
your PC for checking the
No valid file exists in a information stored in it.
USB flash memory. If an ARXP or ARX4 file has been
saved to it, check its content by
means of the file viewer.
After the power is
turned on, it is found
Press
that there is no print
data received.
Because the Print
Data Auto Delete Press
Enable function
When you use the receiving
remains active, no
history, disable the Auto Job
receiving history is
Delete option.
available.
Because the White
Press
Ink Pause Mode
remains active, no When you use the white ink, do
white ink can be not make the White Ink Pause
installed. Mode active.
Although an ink pouch
is needed, a
Set an ink pouch to the black
maintenance solution
cartridge.
pouch is set to the
black cartridge.
318
Remedy
-
"9-1. Troubleshooting
instructions >>P.248"
-
"9-1. Troubleshooting
instructions >>P.248"
-
to clear the error.
-
to clear the error.
-
to clear the error.
-
Error message
Reference