Brother GTX pro Instruction Manual page 54

(7) In the [Hostname or IP address] field, enter the already-setup static IP address of the printer, uncheck the [Query
the printer and automatically select the driver to use], and click [Next]. (One instance of each value is cited as
shown in the window below.)
<TIPS>

If you set the printer's IP address by automatic acquisition, you must check the IP address of the printer in advance. You
can confirm the IP address by selecting [Confirm network setting] -> [IP Address] from the menu. ☞"8-25. Confirm network
setting >>P.243".

If you are using a DNS server, you can use a host name and domain name instead of the IP address. Enter the host name
of your choice.☞ "4-3-3. When connecting via LAN: Static IP address setting >>P.48"
As for the domain name, check with your network administrator.
(8) Then, the detection window of TCP/IP port appears, and the current window will automatically go to the additional
port information window after the detection is completed.
(9) After the window shown below appears, select the [Custom] in the [Device Type], and click [Settings].
54
Installation and preparation