Replacing The Fan Filter - Brother GTX pro Instruction Manual

7-1-7. Replacing the fan filter

When a warning message appears in the warning message window, replace the fan filter with a new one.
(1) Make the gloves which come standard with the printer, as well as a new fan filter, available for use.
(2) From the menu, select [Maintenance] > [Maintenance Part Clean/Replace], and press
(3) Select [Part with Error/Warning] and press
<IMPORTANT>

If any other error or message is displayed on the operation panel or warning message window, follow the message to solve
the problem, then perform the cleaning.
<TIPS>

Pressing
 Pressing
(4) Follow the on-screen message and turn off the power.
(5) Remove the fan filter from the main unit of printer.
<NOTE>

For a proper work operation, be sure to wear the printer-provided gloves.
Precautions to keep good printing quality/use printer over the long term
causes the platen to start moving. Do not put anything around the platen.
will not move the platen or head if the error and warning displayed are [Fan Filter To Be Replaced] only.
.
197
.
Fan filter
X0332