Loading Print Data (Arxp File) From Usb Flash Memory - Brother GTX pro Instruction Manual

6-6-3. Loading print data (ARXP file) from USB flash memory

(1) Insert a USB flash memory into the insertion slot near the operation panel of the printer.
<IMPORTANT>

Do not apply undue force to the USB flash memory when you insert it into the slot. Otherwise, it could be
<TIPS>

Please use a FAT32-formatted USB flash memory of which storage capacity is 2 GB to 32 GB in total. You cannot use a
USB memory with security functions such as password lock function or beyond 32 GB.

Note that the data which can be loaded from the USB flash memory is only the data in the ARXP or ARX4 format.
From the menu, select [Print Data Load], and press
(2)
<TIPS>

The information on file is shown on the liquid crystal panel.
(3) Select a filename to be printed out, and press
<TIPS>

Selecting

Folders in the USB flash memory are shown down to the 3rd layer. Folders created in the 4th layer or below are not
displayed.
will display the file stored in
USB flash insertion
.
.
.
158
Basic printing procedures
damaged.
X0038