Installation Of Waste Ink Tank - Brother GTX pro Instruction Manual

4-1-1. Installation of waste ink tank

Insert the waste ink tube into the main body. Fasten the waste ink tank to the table leg or the like by using two pieces of
string, etc. Insert the waste ink tube into the waste ink tank.
<IMPORTANT>

If the tip of the waste ink tube is immersed in the liquid, it will prevent the smooth flow of the waste ink, to disable the ink
suction operation of the head cleaning function. After the waste ink tank is fastened, the waste ink tube should be cut so
that the length from the tube connection is 5.9 in. (150 mm).

Avoid placing the waste ink tube horizontally as much as possible, and be sure not to let it bend. Otherwise the waste ink
may have difficulty flowing through the tube.
<TIPS>

Install the waste ink tank in the front, because it must be emptied when the waste ink is full.
40
Installation and preparation
5.9 in. (150 mm)
X0312