Brother GTX pro Instruction Manual page 273

(7) With a clean stick R, clean the surrounding area of nozzle surface of print head.
Manually move the carriage to such a position that you can perform the cleaning with ease.
<IMPORTANT>

Be sure not to bring the clean stick R into contact with the nozzle surface.

The used clean stick R should be disposed of, and should not be reused.
Cleaning area
Cleaning
prohibited
area
Surrounding area of nozzle
surface
(8) Close the front cover, turn on the power.
(9) From the menu, select [Head Cleaning] > [Powerful Cleaning] > [All Print Heads], and press
<NOTE>

Dispose of any waste resulting from the cleaning in accordance with applicable laws and ordinances.
<TIPS>

Then, the head cleaning will be performed to prevent any ink from drying up.

Because the cleaning cup will be reused, rinse it in clean cleaning solution and store it in a safe place.
Cleaning conditions
Nozzle surface
Pre-cleaning state Post-cleaning state
273
Troubleshooting
Clean stick R
X0293
.
X0253