Brother GTX pro Instruction Manual page 326

Error code Error message
4502 [Network error]
4503 [Network error]
4504 [Network error]
[No Enable Restore
4506
Data]
4510 [Network error]
5001 [Machine Error]
5010 [PC Data Error]
5020 [Machine Error]
5021 [Machine Error]
5022 [Machine Error]
Description
Press
The network interface Contact your network setup
setting has ended up manager and network
in failure. administrator.
If the problem still persists, please
contact your dealer.
Press
An error was found in
the static IP address Use the maintenance tool to set
of the default gateway. up a correct static IP address of
default gateway once again.
Press
It is the error of static
IP address setup Use the maintenance tool to set
value. up a correct static IP address and
subnet mask value once again.
No data can be
Make note of the error code and
restored because its
error message, and please notify
backup copy was not
it to your dealer.
made.
Press
Error in configuring
the network for the Check the network settings.
printer Contact your network setup
manager if you have a question.
A timeout has Make note of the error code and
occurred at the time of error message, and please notify
initialization. it to your dealer.
Press
An error is detected in
the current print data Create the print data again on the
being run. PC to load it to the printer, and try
the print operation again.
The carriage If the problem still persists even
movement was not after restarting the printer, please
completed. contact your dealer.
If the problem still persists even
Head operation is
after restarting the printer, please
incomplete.
contact your dealer.
If the problem still persists even
Head operation is
after restarting the printer, please
incomplete.
contact your dealer.
326
Remedy
-
to clear the error.
-
to clear the error.
-
to clear the error.
-
-
to clear the error.
-
-
to clear the error.
-
-
-
Error message
Reference