Brother GTX pro Instruction Manual page 176

Cleaning of the nozzle guard, wiper and exhaust cap should be performed separately for the white side and color side.
For the way to perform cleaning, refer to the respective items.
Perform cleaning of the white side.
Prepare a new clean stick R and the cleaning solution.
Nozzle guard
Cleaning
Prepare a new clean stick T and the cleaning solution.
Wiper
Cleaning
Exhaust cap
Cleaning
Cleaning
suction cap
Perform cleaning of the color side.
Rinse the cleaning cup, and prepare a new clean stick R and the cleaning solution.
Nozzle guard
Cleaning
Rinse the cleaning cup, and prepare a new clean stick T and the cleaning solution.
Wiper
Cleaning
Exhaust cap
Cleaning
Cleaning
suction cap
Precautions to keep good printing quality/use printer over the long term
Perform cleaning of the nozzle guard part and the resin part on the white side.
☞"Cleaning the nozzle guard (Use clean stick R) >>P.177"
Perform cleaning of the wiper part on the white side.
☞"Cleaning wiper (Use clean stick T) >>P.180"
Perform cleaning of the exhaust cap part on the white side.
☞"Cleaning exhaust cap (Use clean stick T) >>P.182"
Perform cleaning of the suction cap part on the white side.
☞"Cleaning suction cap (Use clean stick T) >>P.184"
Perform cleaning of the nozzle guard part and the resin part on the color side.
☞"Cleaning the nozzle guard (Use clean stick R) >>P.177"
Perform cleaning of the wiper part on the color side.
☞"Cleaning wiper (Use clean stick T) >>P.180"
Perform cleaning of the exhaust cap part on the color side.
☞"Cleaning exhaust cap (Use clean stick T) >>P.182"
Perform cleaning of the suction cap part on the color side.
☞"Cleaning suction cap (Use clean stick T) >>P.184"
176