At Commands For Time Functions; At Commands For Automatic Functions - insys icom GSM small 2.0 Manual

INSYS GSM small 2.0
12.2.6

AT Commands for Time Functions

Command
AT+CCLK?
AT+CCLK=<time>
AT+CALA?
AT+CALA=<time>[
,<n>[,<type>[,<
text>]]]
12.2.7

AT Commands for Automatic Functions


Automatic execution of AT commands is not possible with the i-modul
UMTS 4.1 basic.
Command
AT^SCFG?
AT^SCFG="AutoEx
ec",<cmd>,<type
>,<index>[,<mod
e>,<ATCmd>[,<pe
riod>]]
Description
Displaying current time and date
Configuring time and date
Refer to the section Energy Conservation Modes and Real-Time Clock for
details.
Displaying alarm time settings
Configuring alarm time
Refer to the section Energy Conservation Modes and Real-Time Clock for
details.
Description
Querying the settings for automatic execution of AT commands
Automatic execution of AT commands
A detailed description of the GSM engine TC35i, TC63i or MC39i is avail-
able on request from INSYS Microelectronics GmbH.
Examples can be found in the section Automatic Execution of AT Com-
mands.
Attention: These settings must be saved with AT^SMSO.
The timers for time-controlled automatic functions start over with every
restart, with AT+CFUN=x,1, with AT&F and with ATZ.
If this command is used while autobauding is enabled (AT+IPR=0), the
baud rate will be fixed to 115000.
AT Command Reference
79