insys icom GSM small 2.0 Manual page 26

Mounting
8 Mounting
This section describes how to mount the INSYS GSM small 2.0 to a DIN rail,
connect the power supply and uninstall it again. Observe the instructions in
the "Safety" section of this manual, in particular the "Safety Instructions for
Electrical Installation" for that purpose unconditionally.
26
Caution!
Moisture and liquids from the environment may seep into
the interior of the INSYS GSM small 2.0!
Fire hazard and damage of the product.
The INSYS GSM small 2.0 must not be used in wet or
damp environments, or in the direct vicinity of water. Install
the INSYS GSM small 2.0 at a dry location, protected from
water spray. Disconnect the power supply before you per-
form any work on a INSYS GSM small 2.0 which may have
been in contact with moisture.
Caution!
The device could be destroyed if the wrong power supply is
used!
If the INSYS GSM small 2.0 is operated with a power sup-
ply that supplies a voltage exceeding the permissible oper-
ating voltage of the INSYS GSM small 2.0, the device will
be destroyed.
Make sure that you use the suitable power supply. Refer to
the Technical Data section for the proper voltage range of
the INSYS GSM small 2.0.
INSYS GSM small 2.0