insys icom GSM small 2.0 Manual page 34

Operating Principle
2. Click OK in the status message.
3. Enter the required settings now.
4. Then, click on the Send settings button in the field on the right.

A progress bar appears above the button.

Now, the settings made are transmitted to the INSYS GSM small 2.0
and stored there.

A message window is displayed that requests to switch the INSYS
GSM small 2.0 off and on again or perform a hardware reset.
5. Click OK in the status message.
6. Disconnect the device from the power supply briefly or perform a
hardware reset.

After the INSYS GSM small 2.0 is rea
changed settings become effective.
34
dy for operation again, the
INSYS GSM small 2.0