Automatic Execution Of At Commands - insys icom GSM small 2.0 Manual

Functions

11.11 Automatic execution of AT commands

The command AT^SCFG enables to execute functions (AT commands) time-
controlled or via activation of the DTR control line.
A total of 3 actions can be configured for time-controlled processes. One action
can be configured for being triggered via DTR. The internal timers for time-
controlled functions start over following a restart or reset. This is also valid for en-
tering ATZ or AT&F!
The most important functions for an application are mentioned using examples in
the following. These examples are also used in the HSComm for GSM:
 Automated PIN entry and login after restart
 Automatic reset
 Alarm via DTR control line
If all functions are configured in the configuration software HSComm, all memory
locations are used.

The settings of this command are stored using the command
AT^SMSO. This command shuts down the INSYS GSM small 2.0. It can
be restarted by briefly disconnecting the power supply.
48
INSYS GSM small 2.0