insys icom GSM small 2.0 Manual page 33

INSYS GSM small 2.0
4. Configure the IN

A reference of the AT comm
Reference".
Save your entries with AT&W.
5.

Not all configurations at the INSYS GSM small 2.0 need to be saved
actively by entering AT&W. Some settings are automatically sav
immediately. We still recommend sending the command AT&W to the
INSYS GSM small 2.0 as your last configuration s
settings are stored safely and are available for th
10.2 Operation with HSComm GSM/GPRS
The software HSComm allows a comfortable configuration of the INSYS GSM
small 2.0. HSComm provides an interface fo
portant AT commands of the INSYS GSM small 2.0. The operation is mostly
self-explanatory. You can download the software from the INSYS i
site (http://www.insys-icom.com/software).
Configuring and operating the INSYS GSM small 2.0 with HSComm
How to configure the INSYS GSM small 2.0 with the

The INSYS GSM small 2.0 is connecte

The software HSComm GSM is installed on the PC.
1. Start the program HSComm GSM.

The program starts.

An "Win Error Code" error message during program start indicates
missing COM interfaces in the operating system.

A progress bar appears in the field on the right if auto-recognition a
program start is enabled in the program settings of HSComm.

If this option is not enabled, the
Read settings button in the field on the right. It is always recom-
mended to read out the settings first that no data get lost when send-
ing later.

Now, the program searches for a conn
tries to read out the settings.

The settings are read out after a short period. A message window in-
dicating "Settings read" is displayed.
SYS GSM small 2.0 using AT commands.
ands can be found in the "AT Command
tep to ensure that all
e next restart.
r the parameters of the most im-
software HSComm.
d to the PC and switched on.
settings can be read out using the
ected INSYS GSM small 2.0 and
Operating Principle
ed
com web-
t
33