Sending An Sms Manually - insys icom GSM small 2.0 Manual

INSYS GSM small 2.0

11.10 Sending an SMS Manually

It is possible to send an SMS manually with the INSYS GSM small 2.0.
Configuration with HSComm
A manually triggered SMS dispatch with the HSComm software is not
possible.
Configuration with AT commands
In order to configure SMS text mode, use
the command
In order to configure the number of the
short message center, use the command
Replace <SMSCno> with the number of the
short message center (SMS Center) in in-
ternational format in quotation marks (e.g.
"+49172...").
In order to send an SMS message, enter
the destination number using the command
Finish the destination number entry in in-
ternational format in quotation marks with
the Enter key <CR>.
Following the prompt >, enter the text of
the SMS and finish the entry with CTRL-Z
(not with the Enter key!).
The INSYS GSM small 2.0 starts to send the SMS now.
AT+CMGF=1
AT+CSCA=<"SMSCno">
AT+CMGS=<"number">
>SMS Text
Functions
47