Automatic Call Acceptance - insys icom GSM small 2.0 Manual

Functions
11.9

Automatic call acceptance

The automatic call acceptance enables the INSYS GSM small 2.0 to accept each
call after the configured number of ring tones.
Configuration with HSComm
In order to enable automatic call acceptance, check on the "Basic set-
tings" tab on the "GSM Connection" panel the check box "automatic call
answer".
Enter the desired number of ring tones that must be waited for before
the INSYS GSM small 2.0 picks up.
Configuration with AT commands
In order to enable the automatic call accep-
tance, use the command
In order to disable the automatic call accep-
tance, use the command
In order to configure the number of ring
tones after which the INSYS GSM small 2.0
accepts the connection, use the command
Replace <n> with the number of ring tones
(<n> = 2...255).
46
INSYS GSM small 2.0
ATS0=1
ATS0=0
ATS=<n>