Novusun CNC NCH02 Manual page 30

4 L-- Level
5 Home
6 Home Level The home input level definition, 1 is the input
7 Home Dir
8 HKB length The return distance after the home operation
3.3.3 Spindle / output parameter configuration (Spindle/OUT)
The spindle / output parameter configuration page is shown in Figure 3-5. This page for a
list of specific parameters to the parameter list, the list number axis. The parameters of the axis
can be adjusted by the knob.
Manual of NCH02
specific input port interface.
The backward hard
definition, 1 is the input high level effective; 0
is the input low level effective.
The home pin setting, 0 indicates close the
home, and 1-8 indicates that the limit pin is
configured on the IN1-IN8 specific input port
interface.
high level effective; 0 is the input low level
effective.
The home's direction , 1 indicates home's
direction is +, and 0 indicates the home's
direction is -.
is completed.
Table 3-3. input parameter configuration
- 28 -
www.nvcnc.net
1/0
limit input level
0-8
1/0
1/0
0-100