Pepperl+Fuchs VB14N Manual page 87

HOST MODE PROGRAMMING
PARAMETER
Stop Phase Edge
(only for On Line 2
Input)
ACK/NAK
Protocol
Quality Counters
VERIFIER
Code Verifier
READING SYSTEM LAYOUT
Device
Assignment
DATA COMMUNICATION SETTING
Host Application
Protocol Type
MAIN SERIAL PORT
Main Port
Communication
Mode
AUXILIARY SERIAL PORT
Data
Transmission
Pass Through
CONTROL RULES
Must be  Leading if
Not available if Operating Mode Selection
Not available if Scanner Cluster Topology Role
Synchronized.
Not available if Operating Mode Selection
Automatic.
Not available if Scanner Cluster Topology Role
Synchronized.
Not available if Code Combination
Not available if Operating Mode Selection
Automatic and  Continuous.
Must be  Master RS232 (Type A) and  Slave RS232 (Type A)
if Auxiliary Serial Port Data TX
Must be  Master RS232 (Type A) and  Slave RS232 (Type A)
if Auxiliary Serial Port Pass Through
Must be  Crisplant if
Must be  Crisplant if
Must be  Crisplant if
Standard.
Must be  Crisplant if
Enable.
Must be  Standard if
Standard.
Must be = Disable if
Master RS232 (Type A) or  Slave RS232 (Type A).
Must be = Disable if
Must be = Disable if
Master RS232 (Type A) or = Slave RS232 (Type A).
 Enable
Extended Phase
 Single Label.
 Enable.
 Enable.
Operating Mode Selection
 Serial On Line.
On Line Options
Main Port Communication Mode
Auxiliary Serial Port Pass Through
Host Application Protocol Type
Local Device Alternative Network Setting
Host Application Protocol Type
Local Device Alternative Network Setting
 On Line.
 Slave
 On Line and 
 Slave
 On Line and 
 On Line.




 Standard.
=
85