Error Codes Table - Pepperl+Fuchs VB14N Manual

HOST MODE PROGRAMMING
5.3

ERROR CODES TABLE

This chapter provides a list of the most important error codes.
CODE INTERPRETATION
COMMAND PARSING
-3 Parameter does not exist.
-4 Invalid range.
-8 Wrong syntax error.
-9 Wrong shortcut error.
-12 Path not found.
-13 Unknown command.
-14 Too many parameters in the programming string.
-15 No command is present in the programming string.
-16 Wrong number of parameters in the programming string.
-17 Unexpected error.
-19 One or more parameters are not applicable.
PARAMETERS PROGRAMMING
3 The current Path is not valid.
7 The current Path is a Folder
8 Parameter Type is not correct.
9 Parameter Value is not correct.
12 One or more Control Rules are not satisfied.
13 Access denied.
87