Pepperl+Fuchs VB14N Manual page 23

HOST MODE PROGRAMMING
After enter the programming string, the reader responds with the message:
Y<space>6<space> 484541444552<CR><LF>
- 5 -
Get value of Digital Output 2 Activation Event parameter in
SETTING folder:
Path: /IO/Out/Out1/Active
Shortcut: 24
Type: 1 (Enumeration)
2 (Entry 2  Partial Read)
Current value:
The 'Get Parameter' programming string is:
The 'Get Shortcut' programming string is:
After entering the programming string, the reader responds with the message:
- 6 -
Get value of No Read String parameter in
Path: /Codes/NoReadStr
Shortcut: 9
Type: 3 (Binary String)
Current value: Empty string
The 'Get Parameter' programming string is:
The 'Get Shortcut' programming string is:
After entering the programming string, the reader responds with the message:
GP<space>/IO/Out/Out1/Active<CR><LF>
GS<space>24<CR><LF>
Y<space>2<CR><LF>
GP<space>/Codes/NoReadStr<CR><LF>
GS<space>9<CR><LF>
Y<space>0<CR><LF>
DIGITAL OUTPUT LINES
CODE DEFINITION folder:
21