HOST MODE PROGRAMMING
5.2
CONTROL RULES TABLE
This chapter provides a list of the most important control rules that can be applied to
the VB14N parameters.
PARAMETER
CODE DEFINITION
Code
Combination
No Read
Message
Associate Same
Codes When
Coming From
Different
Scanners
CODE LABEL SETTINGS #N (DEPTH: n = 1 to 10)
Minimum Label
Length
Maximum Label
Length
Minimum Code
Position
Maximum Code
Position
OPERATING MODES
Operating Mode
Selection
On Line Options
84
CONTROL RULES
Must be Single Label and Code Collection if
Protocol Type
= Crisplant.
Must be Standard Multi Label and Logical Combination if
Operating Mode Selection
Must be Code Collection if
Read(s) Message.
Must be Local No Read(s) Message if
Single Label.
Must be Local No Read(s) Message if
Code Collection.
Not available if
Scanner Cluster Topology Role
Synchronized or Master Multidata.
Value must be
Maximum Label Length
Value must be
Minimum Label Length
Value must be
Maximum Code Position
Value must be
Minimum Code Position
Must be Automatic and Continuous if
Crisplant.
Protocol Type
Must be Continuous if
Must be Automatic and Continuous if
Master Synchronized.
Topology Role
Must be Automatic and Continuous if
Slave Synchronized.
Topology Role
Must be Serial On Line if
Crisplant.
= Continuous.
No Read Message
Code Combination
Code Combination
Host Application
Single Label.
Code Combination
Scanner Cluster
Scanner Cluster
Host Application Protocol Type
Host Application
= Local No
=
=
Master
=