Riello Steel Pro Power 114-2 P Installation, Technical Assistance Service And System Management Manual page 75

− Press the MENU key, select "System test" and press ● to
confirm.
Menu
" "
Domestic Hot Water (DHW)
"
Information
" "
Settings
" "
System Test
" "
− select the unit between "Master" and "Dep1 ... N"
System Test
" "
Boiler
" "
− select "Max. power" with the ▲ / ▼ keys and press ● to
confirm. The fan starts turning at its maximum speed
(which can vary based on the model).
System Test
" "
Test State
" "
Fan Speed
" "
Ionisation
" "
DESCRIPTION
Wobbe index
Nominal supply pressure
After the checks:
− select "OFF" with the ▲ / ▼ keys and press ● to confirm.
− Disconnect the pressure gauge and tighten again the
pressure test point screw (1) upstream from the gas valve.
System Test
" "
Test State
" "
Fan Speed
" "
Ionisation
" "
− After completing the operations, close the module doors.
"
Managing
" "
High Power
" "
0 rpm
" "
0.0 μA
G20 G30 G31
45,7 80,6 70,7 MJ/m
20 28-30 37 mbar
Off
" "
0 rpm
" "
0.0 μA
3
75
COMMISSIONING AND MAINTENANCE