Thermal Module Information; Delivery Temperature; Return Tem; Dhw Temperature - Riello Steel Pro Power 114-2 P Installation, Technical Assistance Service And System Management Manual

3.1.7

Thermal module information

In order to display key information on the screen, press the
menu key and select "Information" with the ▲ / ▼ keys.
Menu
" "
Central Heating (CH)
" "
Domestic Hot Water (DHW)
"
Information
" "
Settings
" "
Press the ● key to confirm.
The following screen will be displayed:
Information
" "
Software Versions
" "
Boiler Status
" "
Boiler History
" "
Error Log
" "
By selecting "Boiler status" and pressing the ● button you have
the following screen:
Boiler Status
" "
Boiler
" "
At this point by selecting "Master" or "Dep1 ... N" the following
values are displayed:

− Delivery temperature

− Return temperature
− DHW temperature (the sensor must be connected in or-
der to display a value; if it is not present, the default val-
ue is displayed)
− Outdoor temperature
− Flue gas temperature
− System temperature (the sensor must be connected in
order to display a value; if it is not present, the default
value is displayed)
− Fan speed
− Ionization
− State
− Error
9
The display shows four lines at a time. You can scroll the list
by using the ▲ / ▼ keys.
Boiler Status
" "
Flow Temperature
" "
Return Temperature
" "

DHW Temperature

" "
Outside Temperature
" "
"
Managing
" "
46.0 °C
" "
43.0 °C
" "
44.0 °C
" "
10.0 °C
" "
By selecting "Boiler Register" and pressing the ● button you
have the following screen:
Boiler History
" "
Boiler
" "
At this point by selecting "Master" or "Dep1 ... N" the following
values are displayed:
− Firing OK
− No firing
− No flame det.
− Oper. days
− Heat. burner hours
− DHW burner hours
Boiler History
" "
Successful Ignitions
" "
Failed Ignitions
" "
Flame Failures
" "
Operation Days
" "
You can scroll the list by using the ▲ / ▼ keys.
By selecting "Error log" and pressing the ● key, the following
values are displayed:
− Error log (the errors listed in paragraph "Manual error list"
are displayed)
− Error filter (in the "Error filter" item, it is possible to se-
lect: Disabled - Vol. Err. - Block)
− Boiler ID filter (in the boiler ID filter item you can choose
between: Disabled - Master - Dep1 ... N)
− Erase Error Log (allowed only with Installer password)
Error Log
" "
Error Log
" "
Filter Error Type
" "
Clear Error Log
" "
You can scroll the list by using the ▲ / ▼ keys.
By selecting "Maintenance" and pressing the ● key, the follow-
ing values are displayed:
− Maintenance log (each time a "Maintenance reminder
reset" is performed, the event is logged)
− Oper. hours since last Maint.
− Oper. hours until next Maint
− Maintenance reminder reset (accessible only with install-
er password)
− Delete Maint. history (accessible only with OEM password)
Service
" "
Service history
" "
Burn hours since last service
"
Burn hours till service
"
Reset Service Reminder
"
73
COMMISSIONING AND MAINTENANCE
Managing
" "
0
1
1
1 days
" "
Disabled
" "
0 hrs
" " "
2000 hrs
" " "
No
" " "