Table of Contents
Advertisement
g.
Replace the cable conduit access plate and tighten the two retaining screws.
NOTE: The cable conduit access plate can be positioned in one of two ways
depending on installer preference. Flip the plate to the desired position with
the wire openings either on the side or on the top of the speaker enclosure
before tightening the screws.
As examples:
•
The side access wire opening can be useful in low profile installations.
•
The top access wire opening can be more convenient to use.
h.
Tighten the cable clamp if it was used.
8.
If required, attach a secondary support line. Connect a secondary support line to
the support loop on the back of the speaker enclosure, as shown here.
Figure 40.
Connecting a Secondary Support Line
ATTENTION:
•
Do not allow any slack in the secondary support line.
•
Ne laissez pas de mou au niveau du filin de sécurité secondaire.
OR
Anchor end to suitable
secure points within the
solid and permanent
building structure.
SF 3C LP and SF 3CT LP User Guide • Installation
35
Advertisement
Table of Contents
Need help?
Do you have a question about the SF 3C LP and is the answer not in the manual?
Questions and answers