Table of Contents
Advertisement
7.
Attach two V-rails and one C-ring across the tile above the hole cut in
previous page, as described below.
a.
Assemble two V-rail half sections so that they become one single piece:
i.
Fit the tab of one end into the slot of the other end.
ii.
Open the V-rail until it locks together.
iii.
Repeat this procedure for the other V-rail.
Figure 17.
Assembling the V-rails
b.
Remove a ceiling tile adjacent to the tile with the hole.
SF 3C LP and SF 3CT LP User Guide • Installation
step 6
on the
18
Advertisement
Table of Contents
Need help?
Do you have a question about the SF 3C LP and is the answer not in the manual?
Questions and answers