Document Options - Xerox N2125A/DT - DocuPrint B/W Laser Printer User Manual

Document Options

Downloaded from www.Manualslib.com
Output
Allows you to set your printer's default paper output
destination. The options are:
• The Standard Bin, which holds up to 500 sheets.
• The optional Face Up Bin, which holds up to 100
• The optional 500 Offset Bin, which holds up to 500
When you select this tab, you can set the finishing mode
and margins.
Finishing Mode
There are two finishing modes:
• Multiple Pages per Side (N-Up printing)
manuals search engine
sheets.
sheets of standard paper up to 14 inches in length. The
offset capability can be set to On or Off via the Control
Panel. The default setting is On.
By default, the printer will print one page image on the
sheet of paper. You can select two, four, six, nine or
sixteen page images per side of paper. The printer will
shrink the page images as needed and will arrange
them on the paper most appropriately for the paper
size and orientation.
You can also choose to print black borders around each
page. The default is to not print borders.
Using the PCL Driver
Chapter 3: Printing 3-13