Front Panel For M9703B I/O (With B01 Application Option); Connectors Specific To M9703B I/O (B01 Application Option) - Keysight M9703B Startup Manual

Step 4: Install the Module
Digitizer can usually work with signals present at the external reference and
clock inputs (REF IN and CLK IN). However, to ensure the best performance, or if
the calibration is found to be unreliable, it is recommended to remove such
signals when working with internal clock.

Front Panel for M9703B I/O (with B01 application option)

Connectors specific to M9703B I/O (B01 application option)

Connector Type
JA, JB, JC, JD USB Mini
Omnetics Nano-D
I/O-EX A, B, C, D connector with 51
pins
18
Front panel of M9703B I/O (with B01 application option).
Description
JTAG FPGA debugging interface for I/O-EX mezzanine.
Real time I/O interfaces with 48 I/Os on each of the four DPUs.
User configurable input/output signals, 2.5 V CMOS compatible.
Connector reference: (51) Socket female Bi-Lobe® Connector from
Omnetics Connector ©.
Keysight M9703B Startup Guide