Table of Contents
Advertisement
2. Make sure that the green LED is lit and is not blinking.
If the LED is blinking, press and release the red LED
button to reset the HomeCentre.
3. Press and hold the red LED button for 2 seconds.
When the test page has printed, the HomeCentre
returns to normal mode.
If the test page does not print, repeat steps 1 through 3.
Calibrating the scanner
If your scanned images don't look as sharp and crisp as they
used to, you may need to recalibrate the scanner.
Calibrating the scanner restores a sharp image quality and
helps the scanner capture clear images and text.
You use the HomeCentre calibration card (included with
the printer) for this procedure. Handle the calibration card
carefully and keep it in a safe place when you're not using
it.
1. From the Start menu, select Programs, HomeCentre,
Calibrate HomeCentre.
89
Intro
Install
Print
Copy
Scan
Maint
Help
Advertisement
Table of Contents
