Xerox Document HomeCentre User Manual page 24

1. Make sure that your PC is turned off.
2. Plug one end of the printer cable into the HomeCentre,
as shown below.
3. Plug the other end of the cable into a free parallel
printer port on your PC.
Make sure that the connectors on the cable are attached
properly and securely.
4. Plug one end of the power cord firmly into the back of
the HomeCentre.
Plug the other end into a grounded electrical outlet.
Inserting the color print head and
the ink cartridges
1. Lift the HomeCentre lid, then press and release the
middle button on the front of the HomeCentre. The
printer carriage will move to the center and stop.
2. Open the Color Print Head box and remove the Color
Print Head from the plastic bag.
Caution Be careful not to touch the Ink Nozzles when
removing the Color Print Head from the plastic bag
24
Intro
Install
Print
Copy
Scan
Maint
Help