Scanning Modes - Xerox Document HomeCentre User Manual

After scanning is complete, you can use the Pagis software
to work with the scanned images. You can insert the
scanned graphics or text directly into an open document. Or
you can edit the text or graphics and save the information
into a separate file. You can then print your completed
project on the HomeCentre.

Scanning modes

You can scan in one of two ways:
Attached—The scanner remains attached to the
HomeCentre base while you feed documents through the
space between scanner and base one page at a time, as
shown below. Use this type of copying to copy pages that
are 8 1/2 inches wide or less.
HomeCentre attached mode
70
Intro
Install
Print
Copy
Scan
Maint
Help