Table of Contents
Advertisement
color pictures, etc. Note: Auto Image Enhance mode is
accessed from the Pagis Editor.
Recalibrating the scanner. If image quality gets worse
with time, you may need to recalibrate the scanner.
Keeping the scanner calibrated ensures that the scanner is
doing its best to capture images and text and that your
project will look good too.
Working space. You should also make sure that you have
enough space on your desk or area where the HomeCentre
is located to complete the scanning. If you are scanning in
detached mode, always use a flat, clean surface. Important:
when using detached mode, do NOT scan on a glass or
other reflective surface; image quality deteriorates when
scanning over reflective surfaces.
Scanning and Editing Text. Scanning using the text
option allows you to perform text editing after the
document has been scanned into the PC. When scanning
using the graphics mode, it is not possible to edit text; only
images can be edited in graphics scan mode.
Positioning the Detached Scanner. Make sure that the
small black scanner actuator sensor (located on the
underside of the detached scanner) is positioned over the
document before starting to scan when in the detached
mode.
73
Intro
Install
Print
Copy
Scan
Maint
Help
Advertisement
Table of Contents
