Important Safety Instructions; Possible Corrective Action; Preface - CAB e4 Series Operator's Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

Important Safety Instructions

Only qualified and trained service technicians should attempt to repair the printer.
Do not place the printer on or near a heat source.
Be sure that the output of the power adapter is 24VDC and your power source matches
the rating listed on the power adapter. Be certain your power source is grounded.
To avoid getting an electric shock, do not use a worn or damaged power cord.
If the power cord becomes damaged or frayed, replace it immediately.
Do not insert anything into the ventilation slots or openings on the printer.
The printer and power adapter should never be operated in a location where either
one can get wet. Personal injury could result.
The printhead becomes hot while printing. To protect from damaging the printhead
and risk of personal injury, avoid touching the printhead.
To get increased printhead lifespan and higher quality printouts, always use high
quality approved labels, tags and thermal transfer ribbons. Approved supplies can
be ordered from your dealer.
Static electricity that accumulates on the surface of the human body or other s
urfaces can damage or destroy the printhead or electronic components in this device.
DO NOT touch the printhead or the electronic components with bare hands.
Place the printer on a flat, firm, solid surface.

Possible Corrective Action

Never jam or block the air vents, or operate in a high temperature environment.
Turn off the power when not in use for extended periods.
Follow all recommendations and setup instructions included in this manual.

Preface

Welcome to cab's e-series label printer. The e Series is designed to provide general-purpose
and high-performance printing capabilities.
cab e-series barcode label printer is a new generation of printing equipment featuring high
performance and multiple functions.
It stands out with its modern appearance and excellent functionality while utilizing a series
of new and cutting edge technologies. Relying on our wealth of experience, we carefully
designed the units to be not just rugged and durable but also easily operated and maintained.
We utilize a 32-bit embedded ARM CPU and a high-tech system platform to guarantee the
highest performance and quality possible.
This manual explains how to set up and begin using your G series printer.
It also provides detailed information on configuring your printer, basic operations, care and
troubleshooting.
Please read this manual carefully before using.
cab Produkttechnik GmbH & Co KG
5
5