Windows Driver Installation; Label Edition Software Elabel - CAB e4 Series Operator's Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

Windows Driver Installation

The printer driver supports Windows XP/2000/NT/ME/98/95 operating systems and can be found on the
CDROM included with the printer or is available for download from: http://www.cabgmbh.com.
Installation
1. Single click the Windows "Start" menu
2. Click "Control Panel" button
Double click "Add printer" icon
3. Choose between "Network" or "Local" option Click "Next" to continue»
4. Choose the appropriate port for your configuration (example - LPT1 for parallel connection, etc)
Click "Next" to continue.
5. Choose "Have disk" and change from A: (Floppy drive) to the location of your CD-ROM drive or
local hard disk location of downloaded drivers - Click "Browse" to continue;
6. Browse to CD-ROM or local hard disk location and choose the Operating System you are using
7. Click "Next" to continue.
Operating system choices are as follows:
-- WIN95
-- WIN98
-- WIN2000
-- WINXP
-- NT4.0
8. Choose your printer model (example: cab e4/200 - Click "Next" to continue.
9. Congratulations! Your cab printer is now installed.
Note:If you need to update the driver, please remove any old versions of the driver before
continuing.

Label edition software eLABEL

Each e4-series printer comes with the powerful bar code software elabel and operating instructions,
which is available on the CD-ROM shipped with the product. If you do not have the CD-ROM or wish to
upgrade your current software it is available for download from:
http://www.cabgmbh.com.
24
Click "Printers" button
Click "Next" to continue»
cab Produkttechnik GmbH & Co KG
24