Chapter 2 Getting Started; Setting Up; Connecting The Printer - CAB e4 Series Operator's Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

Chapter 2 Getting Started

Setting up

Before setting up the printer you should consider the following:
1. Make sure there is adequate space around the printer for loading
consumables and proper ventilation.
2. Make sure the printer is close to the host so the interface cable is
easily accessible to either end.

Connecting the Printer

Power Connection
Caution: (1) Use of the wrong adapter could damage your printer.
cab assumes no liability for any damage in such case.
The rating for the printer is 24VDC.
(2) Do not use the printer near liquids or corrosive chemicals.
1. Make sure the printer is switched OFF.
2. Connect the power cord to the Power Adapter.
3. Connect the Power Adapter's DC output plug to the DC IN port on the back of the printer.
4. Plug the power cord into a live wall outlet.
8
cab Produkttechnik GmbH & Co KG
8