Operation Basics; Power Switch; The Front Panel; Indicator Lamps - CAB e4 Series Operator's Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

Operation Basics

Power Switch

The power switch is on the left side of the printer. The symbol on the
switch is defined as follows:
ON
OFF

The Front Panel

The Front Panel of the printer consists of :
- Three Indicator Lamps: MEDIA, READY and RIBBON
- Three dual function buttons: PAUSE, FEED and CANCEL

Indicator Lamps

The three lamps indicate the status of the printer (please refer to Chapter
4 for error indications).
READY - Solid on: Indicates the printer is in normal state.
MEDIA - Solid on: Indicates the printer is in normal state.
- Blinking along with READY: Running out of media.
- Blinking individually: Indicates the printer is in the 'PAUSE' state.
RIBBON - Solid on: Indicates thermal transfer printing .
- Off: Direct thermal printing (no ribbon installed).
- Blinking along with READY: Running out of ribbon.
20
cab Produkttechnik GmbH & Co KG
20