Ftp Initialization File Entries; Use Asynchronous Calls - Xerox -05W User Manual

FTP Initialization File Entries

Session settings specified in the Connection dialog box can be saved by selecting Save
Settings on Exit in the Configure menu. This is a toggle function which will display a
tick mark when selected. The settings are stored in one of the following files:
Windows 3.1x:
Windows 95:
Windows NT:
The format of the entries is shown in the example below.
[Sessions]
hp9700=hp9700.ses
VaxStation=VaxStation.ses
[hp9700.ses]
Host=hp9700
Login=root
Password=101e002e5f
Account=
SystemType=Auto
LclDir=
RemDir=
[VaxStation.ses]
Host=vax
Login=system
Password=1d101e5813001f5c
Account=
SystemType=Auto
LclDir=
RemDir=

Use Asynchronous Calls

By default FTP uses asynchronous Windows Sockets calls. You can configure FTP
to use synchronous calls by adding the following line under a command group
headed [General]:
Blocking=1
Specifying Blocking=0 or removing this line will cause FTP to use asynchronous
calls.
TTWFTP.INI in the WINDOWS directory.
TTW32FTP.INI in the WIN95 directory.
TTW32FTP.INI in the WINNT directory.
FTP File Transfer
10-13