Xerox -05W User Manual page 127

Setup Menus
when the button is clicked, you would enter the following in the B4 Command text
box:
<"tt07w">
(tt07w is the window class name for TeemTalk-07W.)
Initiating A Script File
You can program a soft button to run a script file when pressed by enclosing the name
of the file and any arguments within the <' (left angle bracket and single quote) and '>
(single quote and right angle bracket) characters. For example, to program a button so
that it will run the script file myscript.scr and assign the values value1 and value2 to
two variables, you would enter the following:
<'myscript.scr(value1,value2)'>
Refer to the chapter entitled Creating A Script File for more information on initiating
script files.
Action Locally Or Transmit To Host
A soft button definition may be actioned locally or transmitted to the host when the
button is clicked. This is determined by the setting of the Local check box next to the
definition. When the check box is unchecked the definition will be transmitted to the
host.
7-53