Segment Memory Size - Xerox -05W User Manual

Initialization Commands
Disable Graphics Show Through
Initialization File: hideGraphics=on
Command Line:
Default Setting:
These commands will prevent graphics from showing through dialog area data that
has a background colour index other than 0. (The commands do not apply to
TeemTalk-05W or TeemTalk-05W32.)

Segment Memory Size

Initialization File: SegmentMemorySize=size
Command Line:
Default Setting:
These commands specify the amount of available segment memory in 1 kilobyte
blocks. The minimum segment memory size that can be specified is 256 kilobytes,
the maximum is 2048 kilobytes. (The commands do not apply to TeemTalk-05W or
TeemTalk-05W32.)
Maximum Number Of Segments In Memory
Initialization File: MaxSegments=#
Command Line:
Default Setting:
These commands specify the maximum number of segments that can be stored in
segment memory. The maximum number cannot exceed 16000. (The commands do
not apply to TeemTalk-05W or TeemTalk-05W32.)
11-24
-g
Graphics shows through alpha
-smsize
256 (kilobytes)
-sn#
8000