Ftu Set & Get Parameters - Xerox -05W User Manual

Creating A Script File
FTU SET & GET Parameters
This section lists the parameters available for the script language FTU SET and FTU
GET commands, together with the values they will accept or return. The actual value
may be specified in upper or lower case, may have double quotes to delimit it as a
string, or may be a previously defined variable.
The list of parameters and values are shown under the following headings:
GroupID
ParamID
SubParamID identifies a particular parameter for Parameter settings.
Value
The Value will be in one of the following formats if not specifically given:
immediate
boolean
string
range
integer
Transfer Protocol Settings
Kermit:
XMODEM:
XMODEM-1K:
YMODEM Batch:
ZMODEM
ASCII
General Parameter Settings
Timer:
Warning Bell:
Discard Partial:
D. File Warning:
Send Delay:
Retry Limit:
12-86
identifies a group of parameters (default is CURRent).
identifies a particular parameter, or in the case of Parameter
settings a sub-group of parameters.
is the value to be set or returned.
no value required, 0 or 1 returned.
0 or 1, No or Yes, True or False, OFF or ON.
a control character (e.g. CR) or its decimal value
enclosed by double quotes.
one of a range of integers as shown (e.g. range 1 -3).
any number.
GroupID
TRANSFER
TRANSFER
TRANSFER
TRANSFER
TRANSFER
TRANSFER
GroupID
PARAMETER
PARAMETER
PARAMETER
PARAMETER
PARAMETER
PARAMETER
ParamID
KERMIT
XMODEM
XMODEM-1K
YMODEMBATCH
ZMODEM
ASCII
ParamID SubParamID Value
GENERAL TIMer
GENERAL BELl
GENERAL DIScard
GENERAL FILEWarn
GENERAL SENDDelay
GENERAL RETRYlimit
Value
immediate
immediate
immediate
immediate
immediate
immediate
boolean
boolean
boolean
boolean
range 0 - 63
range 1 - 63