Xerox -05W User Manual page 106

Setup Menus
CR Implies LF
Factory default: Unselected
When selected, this will cause TeemTalk to interpret each carriage return character it
receives as a carriage return and line feed pair.
Ignore Deletes
Factory default: Unselected
The setting of this option determines whether TeemTalk ignores or actions delete
characters received from the host.
Application Keypad
Factory default: Unselected
The setting of this option determines the effect of pressing keys in the keypad on the
right side of the keyboard.
When unselected, the keypad is in numeric mode and keys will generate the
characters shown on the key caps. When selected, the keypad is in application mode
and keys will generate control functions when pressed.
Note: On some keyboards the keypad acts as both a numeric
Application Cursor Keys
Factory default: Unselected
When this option is selected the cursor keys will generate application program codes
when pressed. Unselected, the keys will generate normal cursor movement
commands.
Note: On some keyboards the keypad acts as both a numeric
Scroll Bar on Maximize
Factory default: Selected
The setting of this option determines whether or not a scroll bar is displayed when the
window is maximized.
7-32
keypad and a cursor key block depending on the setting of
some modifier, such as the Num Lock key. This option only
affects the characters generated when the keypad is acting
as a numeric keypad.
keypad and a cursor key block depending on the setting of
some modifier, such as the Num Lock key. This option only
affects the characters generated when the keypad is acting
as a cursor key block.