Table of Contents
Advertisement
Only cover the burner with one layer of coals. Arrange the ember chips
on top of the burner tray. DO NOT cover the pilot with logs.
Birch Logset Installation
F
B
C
G
Step 1: Log A is placed at the rear center of the media tray
Step 2: Log B is placed at the right corner of the firebox, with the
charred side facing the middle of the media tray
Step 3: Place log C at the left corner of the firebox, with the charred
side facing the middle of the media tray
30
D
E
A
WARNING: This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional
or alternative media, rock wool or other material in this appliance. The
use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
Step 4: Log D rests diagonally on log C with the other end resting in
the middle of the media tray
Step 5: Log E is placed diagonally directly in front of log B
Step 6: Rest log F horizontally between logs C and E
Step 7: Place log G underneath log E in front of the pilot
Installation
XG0230 - 052020
Hide quick links:
Advertisement
Table of Contents
