Section 9: Installing The Accessories; The Delray Square Transitional Burner; Installing Glass Media; Installing A Contemporary Scene (Glass And Stone) - Montigo DelRay Square Series Installation & Maintenance Manual

Installation

Section 9: Installing the Accessories

The DelRay Square transitional burner
The burner for the DelRay Square has been developed in away that equally supports contemporary and traditional scenes without the need for a
burner swap.

Installing glass media

Optional fireglass may be purchased from the dealer. Remove the Door
as shown in the previous Instruction. Once the glass door is removed
place the firestones randomly across the pan and the burners.
NOTE: ONLY COVER THE BURNER WITH ONE LAYER OF FIRESTONES
OR FIREGLASS.
DRSQ38 only use 4.5lb of firestones
Figure 24.b Completed firestone installation
Installing a contemporary scene
(glass and stone)
The combination of a glass firebed with stones places around the
burner ports provide the best contemporary burn scene in terms of
flame height and flame density. Place the fireglass as directed in the
previous section, then the included stones can be placed as shown
provided they don't cover the burner ports.
Figure 24.bb Completed firestone installation
BURNER PORTS SHOWN AS DOTTED LINE
Figure 24.cc Completed Stone installation
Ceramic chips can be broken up and placed in between the stones
providing tyhey dont interfere with the burner ports.
Figure 24.dd Completed ceramic chip installation
Installing the speckled stone media
Optional speckled stone media may be purchased from the dealer.
Remove the Door as shown in the previous Instruction. Once the
glass door is removed place the firestones randomly across the pan
and the burners.
Note: Only cover the burner with one layer.
Figure 21.c Completed Speckled Stone installation
XG0230 - 052020 27