Environmental Conditions; Preparing For The Installation; Tools For Installation - HP StorageWorks ESL E Series Unpacking And Installation Manual

Environmental conditions

The installation site must have the following environmental conditions:
• Humidity: 20%-80% noncondensing
• Temperature: 15ºC to 32ºC (59ºF to 90ºF)
• Altitude: sea level to 10,000 feet
These environmental conditions apply when the library is in operation.
NOTE:
For additional library specifications (including environmental requirements during
shipping and storage), see the

Preparing for the installation

Preparations needed before installing the library are described in:
• the section called "Tools for installation"
• the section called "Taking ESD precautions"

Tools for installation

These tools are needed for unpacking and setting up the library:
• #2 Phillips screwdriver
• Snips for metal bands
• Safety goggles
• Ratchet with 3/8-inch socket (or 3/8-inch open-end wrench)
• Ratchet with 3/4-inch socket (or 3/4-inch open-end wrench)
• Ratchet with 7/16-inch socket (or 7/16-inch open-end wrench)
• Carpenter's level
NOTE:
A 12-inch socket extension is recommended for removing the counter-weight
shipping restraint.
HP StorageWorks ESL E-Series Tape Library users guide
HP StorageWorks ESL E-Series Tape Library unpacking and installation guide
.
17