Receiving The Library; Unpacking The Library - HP StorageWorks ESL E Series Unpacking And Installation Manual

Receiving the library

Unpack the library as close to the installation site as possible. Inspect the shipping
pallet and carton for damage that may have occurred during shipment. Report any
damage to the shipper.
WARNING!
Libraries weigh between 1,135 pounds (515 kg) and 1,459 pounds (662 kg),
depending on their configuration. At least two people should move and install the
library.

Unpacking the library

To unpack the library:
1. Note the side of the pallet where the library will be unloaded. The library may be
unloaded from only the ramp side of the pallet (see
2. Verify the minimum floor space requirements (see
NOTE:
Figure 4
unboxing site. Unboxing the library requires a minimum of 3 feet (91
cm) on all sides. The side used for the unloading ramp requires 10 feet
(3.05 m). The minimum height required for unpacking the library is 85
inches (2.16 meters).
shows the minimum floor space required by the library at its
HP StorageWorks ESL E-Series Tape Library unpacking and installation guide
Figure 4).
Figure 4).
19