HP StorageWorks ESL E Series Unpacking And Installation Manual page 50

a.
Take one colored tie wrap and use it to group the cluster's SCSI cables
together on the SCSI port end of the tape drives. Attach it between the
cluster cable clamp and the SCSI ports.
b.
Take the second tie wrap of the same color and use it to group the cluster's
SCSI cables together nearest to the SCSI port end of the e2400-160
interface controllers. Attach it between the cluster cable restraint bracket
and the SCSI ports.
c. Take one white tie wrap and use it to group the cluster's SCSI cables
together near the cable access holes in the sheet metal on the right of the
library cabinet.
NOTE:
The other white tie wraps are provided as spares.
5.
Route the SCSI cables through the cluster cable clamp on the lower right corner of
the cluster frame (see
50
Installing the library
Figure 30).